
Spring start-up
Turning the water back on, checking the valves, pipes and sprinkler heads, and running each zone to spot leaks, breaks or heads that need adjusting.
Pick a service to see our work and ask for a quote.

Turning the water back on, checking the valves, pipes and sprinkler heads, and running each zone to spot leaks, breaks or heads that need adjusting.

Shutting off the water supply and clearing the lines with compressed air, zone by zone, so water is not left in the pipes and heads over winter.

Planning the zones for your lawn and beds, laying out the pipe and heads, setting valves and the controller, then testing each zone and tidying up the work area.

Finding the problem, whether it is a broken head, a leaking line, a stuck valve or a wiring fault, then replacing or fixing the part and running the zone again to check it.

Low-flow lines and emitters for garden beds, shrubs, trees and planters, laid out to bring water to the roots and connected to your existing water supply or system.

Swapping an old timer for a smart controller, wiring it to your zones, and setting up the watering schedule so you know how to use it.
Describe the job in your own words and add a few photos. We'll get back to you with the next steps.